Konica Minolta bizhub 163 User Manual

Utility mode/Copy mode parameters
7
bizhub 163/211 7-15
Changing the print density ("PRINT DENSITY" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "PRINT DENSITY" is selected, and then
press the [OK] key.
3 Press the [*] or [)] key until the desired density level is selected, and
then press the [OK] key.
The "MACHINE SETTING" menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(BOOK)
DENSITY(ADF)
PRINT DENSITY
PRINT DENSITY
OK

Konica Minolta bizhub 163 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Paper Size	A3
Resolution	600 x 600 dpi
Copy Speed	16 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Connectivity	USB 2.0
Paper Input Capacity	250 sheets
Paper Output Capacity	100 sheets
Memory	32 MB
Type	Monochrome
Duplex Printing	Manual
Network Connectivity	Optional
Dimensions	570 x 531 x 449 mm
Zoom Range	50% - 200%