How to fix TCP/IP setting for the computer is incorrect on Konica Minolta All in One Printer?
If the TCP/IP setting for the computer is incorrect, which causes connection failure on your Konica Minolta All in One Printer, check the network settings on the computer.
What to do if device IP address entered in IP Scanner is incorrect on Konica Minolta All in One Printer?
If the device IP address entered in IP Scanner is incorrect, causing connection failure on your Konica Minolta All in One Printer, correct the IP address.
Why transmission cannot be interrupted due to time required to interrupt the operation on Konica Minolta All in One Printer?
If transmission from a terminal or reception to a computer cannot be interrupted due to time required to interrupt the operation on your Konica Minolta All in One Printer, wait until the operation is interrupted. To interrupt the operation quickly, exit ImageReceiver. However, data already received at the computer but not yet processed with IP Scanner will be deleted.
What to do if an error occurred during image conversion by IP Scanner on Konica Minolta All in One Printer?
If an error occurred during image conversion by IP Scanner, making the file unusable on your Konica Minolta All in One Printer, that file is unusable. Exit ImageReceiver, and then send the scan again. If a high scanning resolution has been specified, reduce the resolution or decrease the number of pages scanned at one time, and then scan the document again.
What to do if the application that allows images to be viewed is not installed on Konica Minolta All in One Printer?
If the application that allows images to be viewed is not installed, or the application is installed, but is not linked to images, install the viewing application. Link the file to a viewing application that allows you to view TIFF and PDF files.
What to do if the message “Failed to connect to machine” appears on Konica Minolta All in One Printer?
If you see the message “Failed to connect to machine” on your Konica Minolta All in One Printer, the machine may not be turned on. Turn on the machine and remember to wait about 10 seconds after turning it off before turning it on again, as it may not operate correctly if turned on immediately.
What to do if transmission is not possible due to other causes on Konica Minolta All in One Printer?
To address transmission issues on your Konica Minolta All in One Printer due to other causes, check the list of transmissions in the Job List screen for details of the transmission error, and then refer to the table of error codes.
What to do if transmission fails due to damaged LAN cable on Konica Minolta All in One Printer?
If transmission is not possible on your Konica Minolta All in One Printer due to a damaged LAN cable, replace the LAN cable.
Why is transmission not possible because necessary settings are not registered on Konica Minolta All in One Printer?
If transmission is not possible on your Konica Minolta All in One Printer because the necessary settings are not registered, specify the necessary network settings.
What to do if transmission fails due to large image data size on Konica Minolta All in One Printer?
If transmission is not possible on your Konica Minolta All in One Printer because the image data is too large, increase the timeout setting on the receiving end. Decrease the size of the image data, and then try transmitting again.
General| Brand | Konica Minolta |
|---|---|
| Model | bizhub 200 |
| Category | All in One Printer |
| Language | English |
Explains the machine's compliance with ENERGY STAR® guidelines for energy efficiency.
Defines ENERGY STAR® products and their benefits for energy efficiency and the environment.
Covers critical safety instructions, warnings, and precautions for operators.
Provides regulatory compliance information for FCC and Canadian standards.
Explains laser safety, class certification, and internal radiation details.
Identifies and explains the meaning of safety precaution notations and labels on the machine.
Specifies the recommended clearances for proper machine operation and maintenance.
Outlines important precautions for power source, operating environment, and copy storage.
Identifies major parts of the machine and their basic functions for user understanding.
Provides instructions for adjusting the control panel angle for better ergonomics.
Explains the procedure for powering on the machine using its two power controls.
Step-by-step instructions for loading paper into the main paper trays.
Guide for loading paper into the Large Capacity Tray (LCT) for higher volume needs.
Instructions for loading paper into the bypass tray for special paper types or sizes.
Details the basic steps involved in making a standard copy of a document.
Explains conflicts between certain copy settings and their resolution priority.
Describes methods for placing originals for scanning, via ADF or original glass.
How to configure settings like size, orientation, and margins for document input.
Guides users on choosing paper source and size for output.
Details how to adjust the size of the copied image using zoom ratios.
Configuration options for simplex and duplex scanning and printing.
Adjusting copy quality and density based on document type and appearance.
Allows users to view and modify current copy job settings through detail screens.
Prints a single sample copy to verify settings before producing a large batch.
Temporarily halts a current job to perform a different one, then resumes the original.
Saves and recalls custom copy settings for frequent use.
Customizes touch panel behavior for easier operation and accessibility.
Displays information about active, queued, and completed jobs for monitoring.
Covers checking job status, print order, and the process of deleting jobs.
Guides users on what to do when a critical malfunction requires technical support.
Detailed steps for clearing paper misfeeds based on their location.
Instructions for adding paper to the indicated tray when it is empty.
Addresses memory limitations that may cause job deletion during scanning.
Information on toner levels and when to replace the toner bottle.
Guidance on replacing the staple cartridge when the finisher is empty.
A table listing common symptoms, their causes, and remedies for quick problem resolution.
Comprehensive list of system messages and corresponding troubleshooting actions.
Technical data for the copier, including physical dimensions, power, and performance metrics.
Explains the automatic paper size selection based on document and zoom settings.
Describes automatic zoom ratio selection to match paper size.
Allows custom resizing using independent horizontal and vertical zoom controls.
How to scan large documents in segments as a single job.
Details the available methods for sorting output copies.
Details the basic steps involved in making a standard copy of a document.
Explains conflicts between certain copy settings and their resolution priority.
Describes methods for placing originals for scanning, via ADF or original glass.
How to configure settings like size, orientation, and margins for document input.
Guides users on choosing paper source and size for output.
Details how to adjust the size of the copied image using zoom ratios.
Configuration options for simplex and duplex scanning and printing.
Adjusting copy quality and density based on document type and appearance.
Allows combining multiple pages onto a single sheet for paper savings.
Options for sorting, stapling, and hole-punching the final copies.
Enables queuing new jobs while the current one is in progress.
Procedures for managing active or queued copy jobs by stopping or deleting them.
This manual detailing basic copy functions, precautions, and troubleshooting.
Covers network scanning capabilities, including Scan to E-Mail and FTP.
Details operations for saving, routing, and retrieving documents in user boxes.
Information on using the standard built-in printer controller functions.
Basic instructions for using the printer controller functions.
Covers advanced scanning functions with the optional scanner unit.
Details fax functions and operations when the fax kit is installed.
Clarifies the convention for specifying paper dimensions as width and length.
Defines lengthwise and crosswise paper orientations and their corresponding symbols.
Covers critical safety instructions, warnings, and precautions for operators.
Explains the meaning and severity levels of WARNING and CAUTION indicators.
Interprets various symbols used for safety warnings and prohibitions.
Warns against tampering with internal components or modifying the machine.
Provides crucial safety instructions for using and handling the power cord correctly.
Details requirements for power supply voltage, plug configuration, and avoiding overloads.
Safety guidelines for handling the power plug and cleaning its terminals.
Emphasizes the necessity of connecting to a grounded electrical outlet.
Safety precautions related to placing the machine and its immediate environment.
Stresses the importance of adequate ventilation for safe and healthy operation.
Outlines immediate safety actions for critical machine issues like overheating or damage.
Safety warnings concerning toner and toner bottles, and handling toner spills.
Provides essential precautions for safely moving the machine to prevent damage or injury.
Recommends unplugging the machine when it will be unused for extended periods.
Details FCC compliance for Class A digital devices and radio frequency energy.
Outlines Canadian compliance for Class A digital apparatus.
Specific usage guidance for users in regions adhering to Class B regulations.
Usage guidance for users in regions not adhering to Class B regulations.
Technical details on the laser diode, its power, and the print head unit's serviceability.
States the machine's certification as a Class 1 Laser product under US standards.
Laser safety information tailored for users in European countries.
Laser safety information specific to users in Denmark.
Laser safety information for users in Finland and Sweden.
Laser safety information for users in Norway.
Shows the location and appearance of the laser safety label affixed to the machine.
Advises on ozone generation and the necessity of proper ventilation during operation.
Specifies noise level information according to European regulations.
Explains the symbol for WEEE compliance and proper disposal methods.
Outlines requirements for voltage stability and frequency for the power source.
Specifies the recommended temperature and humidity ranges for correct machine operation.
Offers advice on how to store copies to maintain their quality and prevent fading.
Identifies major parts of the machine and their basic functions for user understanding.
Provides instructions for adjusting the control panel angle for better ergonomics.
Explains the procedure for powering on the machine using its two power controls.
Step-by-step instructions for loading paper into the main paper trays.
Guide for loading paper into the Large Capacity Tray (LCT) for higher volume needs.
Instructions for loading paper into the bypass tray for special paper types or sizes.
Details the basic steps involved in making a standard copy of a document.
Explains conflicts between certain copy settings and their resolution priority.
Describes methods for placing originals for scanning, via ADF or original glass.
How to configure settings like size, orientation, and margins for document input.
Guides users on choosing paper source and size for output.
Details how to adjust the size of the copied image using zoom ratios.
Configuration options for simplex and duplex scanning and printing.
Adjusting copy quality and density based on document type and appearance.
Allows combining multiple pages onto a single sheet for paper savings.
Options for sorting, stapling, and hole-punching the final copies.
Enables queuing new jobs while the current one is in progress.
Procedures for managing active or queued copy jobs by stopping or deleting them.
Allows users to view and modify current copy job settings through detail screens.
Prints a single sample copy to verify settings before producing a large batch.
Temporarily halts a current job to perform a different one, then resumes the original.
Saves and recalls custom copy settings for frequent use.
Customizes touch panel behavior for easier operation and accessibility.
Displays information about active, queued, and completed jobs for monitoring.
Covers checking job status, print order, and the process of deleting jobs.
Guides users on what to do when a critical malfunction requires technical support.
Detailed steps for clearing paper misfeeds based on their location.
Instructions for adding paper to the indicated tray when it is empty.
Addresses memory limitations that may cause job deletion during scanning.
Information on toner levels and when to replace the toner bottle.
Guidance on replacing the staple cartridge when the finisher is empty.
A table listing common symptoms, their causes, and remedies for quick problem resolution.
Comprehensive list of system messages and corresponding troubleshooting actions.
Technical data for the copier, including physical dimensions, power, and performance metrics.
Specifications for paper types, sizes, and capacities for various paper sources.
How to specify paper size and type for the bypass tray, including custom sizes.
Guidelines for documents that can be loaded into the ADF and placed on the original glass.
Warnings against loading certain types of documents into the ADF to prevent misfeeds or damage.
Precautions for storing paper to prevent misfeeds and maintain quality.
How the machine automatically selects the next available paper tray when one runs out.
The default sequence in which paper trays are automatically selected.
Functionality to add front and back cover pages to copies, using blank or original pages.
Inserting different paper, like colored sheets, as insertion sheets into copies.
Inserts paper between OHP transparencies to prevent sticking.
Printing copies with a margin for easier storage in binders.
Removes unwanted areas from copies, such as shadows or fax transmission info.
Prints multiple copies of a scanned area onto a single output sheet.
Copies left and right pages of a spread onto separate pages or the same page.
Arranges double-sided copies for booklet binding, with optional stapling.
Adds distribution numbers or preset text stamps to copies.
Overlays stored images onto copies, available with optional hard disk.
Inverts image colors, making light areas dark and vice versa.
Setting the machine to continuously scan documents.
Step-by-step instructions for replacing the toner bottle when it is depleted.
Procedures for replacing staple cartridges in the finisher and saddle stitcher units.
Instructions for resolving staple jams within the finisher and saddle stitcher.
Guidance on how to empty the hole-punch waste container to maintain functionality.
Details how to clean various parts of the machine, including housing and glass.
How to access and view the total count of prints made by the machine.
Advises users to contact service for required periodic maintenance.
Introduces the structure and available functions within the Utility mode menu.
Allows customization of default machine settings for user preferences.
Covers settings related to user management, such as tone volume and panel cleaning.
Guides users on how to access the administrative settings screens.
Procedures for setting initial parameters like date, time, and language.
Configuration options for administrator access codes and copy limits.
Manages user authentication and account track settings for access control.
Details on setting up accounts, passwords, and print limits.
Configuration for external server or machine-based user authentication.
Allows modification of machine behavior by adjusting software switch settings.
Configuration of enhanced security features like password rules and access locks.
Procedure to unlock operations after excessive incorrect password attempts.
Operations for managing internal memory, including data erasure and resetting settings.
Defines the rules and limitations for creating secure passwords.
Instructions on using the on-screen keyboard for typing passwords and text.
Definitions of technical terms and acronyms used in the manual.
An alphabetical index to help users quickly find specific topics within the manual.
To Next Page
