bizhub 306/266 5-11
5.4 Adding functions
5
5.4.3 Specifying header printing
1 Press the Utility key.
2 Use the +/, key to select [ADMIN. MANAGEMENT], then press the OK key.
3 Enter the administrator number using the Keypad, then press the OK key.
% The factory default of the administrator number is [000000].
4 Use the +/, key to select [E-MAIL SETTING 2], then press the OK key.
5 Use the +/, key to select [HEADER PRINT], then press the OK key.
6 Use the +/, key to select [OFF] or [ON], then press the OK key.
This returns to the E-mail Setting 2 screen.
To Next Page
Loading...
Need help?
General
