Konica Minolta Bizhub 3320 User Manual

User's Guide
- 164 -
Quality menu
Use
To
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Specify the printed output resolution in dots per inch.
Note: 600 dpi is the factory default setting.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Isolated
Enable more pixels to print in clusters for clarity, in order to enhance images
horizontally or vertically, or to enhance fonts.
Note: Off is the factory default setting.
Toner Darkness
1–10
Lighten or darken the printed output.
Notes:
• 8 is the factory default setting.
• Selecting a smaller number can help conserve toner.
Enhance Fine Lines
On
Off
Enable a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts.
Notes:
• Off is the factory default setting.
• You can set this option from the printer software. For Windows users, click
File >Print, and then click Properties, Preferences, Options, or Setup. For
Macintosh users, choose File >Print, and then adjust the settings from the
Print dialog and pop-up menus.
• To set this option using the Embedded Web Server, type the network printer
IP address in the Web browser address field.
Gray Correction
Auto
Off
Automatically adjust the contrast enhancement applied to images.
Note: Auto is the factory default setting.

Konica Minolta Bizhub 3320 Specifications

General

Print Speed	33 ppm
Print Resolution	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Duplex Printing	Yes
Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Maximum Paper Size	A4
Scanner Type	Flatbed with ADF
Automatic Document Feeder (ADF)	Yes, 50 sheets
Fax Speed	33.6 Kbps
Monthly Duty Cycle	50, 000 pages
Copy Speed	33 cpm
Copy Resolution	600 x 600 dpi
Operating System Compatibility	Windows, Mac, Linux
Connectivity	USB, Ethernet
Paper Capacity	250 sheets