Why is paper not feeding from the specified source on my Konica Minolta bizhub 350?
If paper is not being fed from the specified paper source on your Konica Minolta All in One Printer, it's likely because the paper source is loaded with paper of a different size or orientation than what's specified in your print settings. Make sure the paper loaded matches the required size and orientation.
Why is my Konica Minolta bizhub 350 unable to print?
If your Konica Minolta All in One Printer is unable to print, there are several potential causes. First, ensure the printer cable (network, parallel, or USB) is properly connected. An error might have occurred within the machine, so check the control panel for any alerts. Insufficient computer memory could also be the issue; try a test print. Also, verify that the correct account name or password has been entered if account track or authentication settings are applied. Finally, the printer driver selected may not be compatible, so check the printer name selected.
What to do if Konica Minolta bizhub 350 All in One Printer displays error ED09CC?
If your Konica Minolta All in One Printer displays error ED09CC, the FTP server is malfunctioning. Check the status of the FTP server.
What to do if Konica Minolta All in One Printer displays error ED09CA?
If your Konica Minolta All in One Printer displays error ED09CA, an error occurred when data was being transferred. Check that the FTP server is operating properly, or check that the LAN cable is not broken.
What does error ED09C9 mean on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error ED09C9, the FTP server capacity is full. Free up disk space on the FTP server.
What causes error E7XXXX on Konica Minolta bizhub 350?
If your Konica Minolta All in One Printer displays error E7XXXX, it indicates that SMTP authentication failed. Check the SMTP authentication account and password.
How to resolve error E4DXXX on Konica Minolta All in One Printer?
If your Konica Minolta All in One Printer displays error E4DXXX, the SMTP server address is not specified, preventing connection to the e-mail server. Specify the SMTP server address.
How to fix Konica Minolta All in One Printer error E5AXXX?
If your Konica Minolta All in One Printer shows error code E5AXXX, it indicates that the DNS settings are incorrect, preventing transmission. Check the DNS settings.
How to fix Konica Minolta All in One Printer staple position?
If the staple position on your Konica Minolta All in One Printer is incorrect, the orientation setting is likely the cause. Check the stapling position within the printer driver setup dialog box and adjust accordingly.
What to do if the message “Failed to connect to machine” appears on Konica Minolta All in One Printer?
If you see the message “Failed to connect to machine” on your Konica Minolta All in One Printer, the machine may not be turned on. Turn on the machine and remember to wait about 10 seconds after turning it off before turning it on again, as it may not operate correctly if turned on immediately.
General| Category | All in One Printer |
|---|---|
| Printing Technology | Laser |
| Functions | Print, Copy, Scan, Fax |
| Print Speed | 35 ppm |
| Print Resolution | 600 x 600 dpi |
| Copy Speed | 35 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 kbps |
| Paper Capacity | 550 sheets |
| Monthly Duty Cycle | 150, 000 pages |
| First Print Out Time | 6.5 seconds |
| Duplex Printing | Yes |
| Max Memory | 320 MB |
| Processor Speed | 400 MHz |
| Media Types | Plain paper, Envelopes |
| Scanner Type | Flatbed |
| Connectivity | USB |
| Network Connectivity | Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
To Next Page