[Scan Functions] 1-11
1.3 Specifying a destination
1
Selecting a destination from the history
In [Job History], select a destination from the history of scan transmission destinations or saved destinations.
The history shows the latest five destinations. If necessary, multiple destinations can be selected from the
history.
If a registered destination is edited or the Main Power Switch is turned off and on, history information is de-
leted.
Searching for an E-mail address from the LDAP server
When you are using the LDAP server or Active Directory of Windows Server, search for an E-mail address
through the server.
0 The server must be registered in advance. The registration procedure is explained using Web Connec-
tion. For details, refer to Chapter 2 "Configuring the Operating Environment of This Machine" in [User's
Guide Applied Functions].
0 This function is available in Scan to E-mail mode.
1 Select [Addr. Book] - [LDAP], then tap [Address Search (LDAP)] or [Adv. Search (LDAP)].
2 Enter the keyword, then tap [Search].
% [Address Search (LDAP)] is performed using a single keyword.
% [Adv. Search (LDAP)] is performed using a combination of keywords for each category.
3 Select the destination from the search result.
% If you tap [Register], you can add the searched destination to the address book.
% If you tap [Details], you can view detailed information of the searched destination.
To Next Page
Loading...
General
