[Scan Functions] 9-3
9.2 Preparation for TWAIN/WIA scanning
9
9.2 Preparation for TWAIN/WIA scanning
9.2.1 Machine side: Operations required to use this function (for administrators)
Checking a LAN cable for connection
Check that a LAN cable connected to the network is connected to the LAN port of this machine.
Checking the network settings
Print out the Configuration Page, then check that an IP address is assigned to this machine.
To print out the Configuration Page, select [Utility] - [User Settings] - [Printer Settings] - [Print Reports] - [Con-
figuration Page].
dReference
If no IP address is assigned to this machine, you will need to configure the network. For details, refer to [Quick
Start Guide].
9.2.2 Computer side: Operations required to use this function
Operating environment of computer
In Windows:
In Mac OS:
Item Specifications
Supported operating
systems
Windows XP/Vista/7/8/Server 2003/Server 2008 (32 bit)
Windows XP/Vista/7/8/Server 2003/Server 2008/Server 2008 R2/Server 2012
(64 bit)
* For the latest information such as the service pack, refer to Readme.
CPU Any processor of the same or higher specifications as recommended for your
operating system
Memory Memory capacity as recommended for your operating system
Item Specifications
Supported operating
systems
Mac OS X (10.3.9, 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.x)
CPU PowerPC, Intel Processor
Memory Memory capacity as recommended for your operating system
To Next Page
Loading...
General
