10
Utility mode
10-26 Network Fax
10.6 Entering power save mode (Fax)
Set the Entering Power Save Mode (Fax).
*
indicates factory default setting.
1 Open the Administrator Setting screen (See "Entering administrator
setting" on page 10-4).
2 Press [System Setting]
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [System
Setting], enter 1 through the numeric keypad.
Item Description Available value
Entering Power
Save Mode
(Fax)
If the [Immediately] have been selected and
it is power save mode when input signals
come, then power save mode will be re-
sumed after completion of reception.
Normal
*
/ Immediately
To Next Page
Loading...
Need help?
General
