11
Explanation of reports and lists
11-30 Network Fax
11.13 Fax setting list
The set value list of the fax set up into this machine can be printed.
1 Press [Fax] and press [Utility/Counter] on the control panel.
2 Press [Administrator Setting].
3 Enter the password and press [OK].
– The password for the administrator can be changed in [Security
Setting]. The administrator should have a responsibility for the
management of the password.
4 Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
5 Press [Job Settings List].
To Next Page
Loading...
Need help?
General
