10
Utility mode
10-48 Network Fax
10.14 SMTP TX/RX setting
Set items related to the network fax.
*
indicates factory default setting.
1 Open the Administrator Setting screen (See "Entering administrator
setting" on page 10-4).
2 Press [Network Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Network
Setting], enter 5 through the numeric keypad.
Item Description Available value
SMTP TX Set-
ting
Port No. Set a port number while in
the SMTP transmission.
1 - 65535 (25*)
Connection
Timeout
Set a time for the connec-
tion timeout while in the
SMTP transmission.
30 - 300 (60 sec.*)
SMTP RX Set-
ting
SMTP RX A setting is made to decide
whether or not the SMTP
reception function is used.
ON* / OFF
Port No. Set a port number while in
the SMTP reception.
1 - 65535 (25*)
Connection
Timeout
Set a time for the connec-
tion timeout while in the
SMTP reception.
5 - 1000 (60 sec.*)
To Next Page
Loading...
Need help?
General
