bizhub C652/C652DS/C552/C552DS/C452 2-97
2.29 Print (IPPS)
2
2.29 Print (IPPS)
Configure settings for IPPS printing.
When this machine starts IPP printing, the communication between the computer and this machine is
encrypted using the SSL. The encryption using the SSL can enhance the security during IPP printing.
To use IPPS printing on the Windows Vista/Server 2008 system, check the following points.
- Enter "https://[host-name].[domain-name]/ipp". These [host-name] and [domain-name] must be the
"DNS Host Name" and "DNS Default Domain Name" that you have set for the "TCP/IP Setting".
- Your computer must be able to resolve the name of this machine using the DNS. Register this machine
in the DNS server and configure the DNS settings in your computer in advance.
- If the certificate of this machine is not the one issued by the Certificate Authority (CA), you must register
the device certificate on the Windows Vista system as the Trusted Root Certification Authorities
certificate for local computers.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d Reference
For details on how to install the printer driver, refer to the "User's Guide [Print Operations]".
2.29.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
- To use IPPS printing on the Windows Vista/Server 2008 system, correctly set the "DNS Host Name"
and "DNS Default Domain Name" that have been registered on the DNS server before creating its
certificate. If their settings are incorrect, you cannot establish the communication connection in IPPS.
For details, refer to page 2-6.
2.29.2 IPP Setting
Configure settings for IPP printing.
For details, refer to page 2-95.
2.29.3 Device Certificate Setting
Configure settings for SSL communication.
For details, refer to page 2-15.
TCP/IP Settings
IPP Setting
Device Certificate Setting
Do you authorize?
Yes No
IPP Authentication Setting
Finish
To Next Page
Loading...
Need help?
General
