bizhub C652/C652DS/C552/C552DS/C452 2-64
2.19 Searching for the E-mail address in the LDAP server
2
2.19.4 LDAP over SSL
Setting up the LDAP server
In the administrator mode of PageScope Web Connection, select "Network" ö "LDAP Setting" ö "Setting
Up LDAP" ö [Edit].
Certificate Verification Settings
In the administrator mode of PageScope Web Connection, select "Security" ö "Certificate Verification
Settings".
Item Description Prior check
SSL Setting Select this check box to encrypt an SSL communication
between this machine and the LDAP server.
Does the server sup-
port SSL?
Port Number (SSL) Enter the port number to be used for SSL communication.
Default setting: 636
Server port number
Certificate Verifica-
tion Level Settings
To verify the server certificate, configure settings to verify
the certificate.
Validity Period Select whether to check that the server certificate is within
the validity period.
CN Select whether to check that the CN of the server certifi-
cate matches the server address.
Key Usage Select whether to check that the server certificate is used
according to the purpose approved by the issuer.
Chain Select whether to check that the server certificate chain
(certification path) is correct.
The chain is validated by referencing the external certifi-
cates managed on this machine. For details, refer to
page 2-210.
Expiration Date
Confirmation
Select whether to check that the server certificate is within
the validity period.
The OCSP service and CRL (Certificate Revocation List)
are checked in this order when the expiration date of the
certificate is checked.
Item Description Prior check
Certificate Verifica-
tion Settings
Select "ON" to verify the server certificate.
To Next Page
Loading...
Need help?
General
