Konica Minolta BIZHUB C452 User Manual

bizhub C652/C652DS/C552/C552DS/C452 2-152
2.48 Restricting users of this machine (LDAP)
2
2.48 Restricting users of this machine (LDAP)
Configure settings to restrict users who can access to this machine using the LDAP server.
These settings are required if you use the LDAP server for user authentication. You can restrict the functions
available to each user.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
Reference
- To use the same LDAP server for both user authentication and destination search, the certificate
verification settings of the LDAP server for user authentication specified in "External Server Settings"
are determined according to the certificate verification settings of the LDAP server for destination
search specified in "Network" ö "LDAP Setting" ö "Setting Up LDAP". For details on LDAP server
settings for destination search and certificate verification settings, refer to page 2-60.
2.48.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
TCP/IP Settings
External Server Settings
General Settings
Administrative Setting
Default Function Permis-
sion
Do you have an SSL
communication with the
LDAP server?
Yes No
LDAP over SSL
Finish

Konica Minolta BIZHUB C452 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed	45 ppm
Scan Resolution	600 x 600 dpi
Copy Speed	45 cpm
Copy Resolution	600 x 600 dpi
Monthly Duty Cycle	150, 000 pages
Duplex Printing	Yes
Hard Drive	250 GB
Type	Color Laser
Print Resolution	1200 x 1200 dpi
Fax Resolution	200 x 200 dpi
Paper Capacity	3, 650 sheets
Paper Size	A3, A4, A5, B4, B5
Connectivity	USB, Ethernet
Memory	2 GB
Display	8.5-inch color touch panel