Machine Manager Setting
13
bizhub PRO 1050P 13-21
Procedure
1 Touch [01 System Setting] - [03 Weekly Timer Setting] - [05 Set Pass-
word for Timer Interrupt].
2 Use the touch panel keypad to enter a four-digit password.
2
Note
When the password setting is 0000, Timer Interrupt can be used simply
by turning the machine off, then on. In this case, you will be asked to en-
ter the duration of use (a period of time to turn the machine power on).
3 Touch [OK] to complete the setting and return to the Weekly Timer Set-
ting Menu Screen.
4 Touch [Return] to restore the Machine Manager Setting Menu Screen.
To Next Page
Loading...
Need help?
General
