Machine Manager Setting
13
bizhub PRO 1050P 13-27
Procedure
1 Touch [02 Manager/Machine Register] - [01 Machine Manager Regis-
ter].
2 Touch [Name Input] to display the Machine Manager Name Input
Screen. Use the touch panel keypad to register the machine manager
name. The eight characters including a hyphen (-) can be entered.
3 Touch [OK] to complete the setting to return to the previous screen.
4 Enter the extension number of the machine manager on the right side
of [Extension Number Input] using the touch panel keypad.
- The five-digit numbers including a hyphen (-) can be entered.
- When the extension number is below five digits, enter hyphens to
make it five. If the hyphen is entered as the first number, it is dis-
played as a space on the Utility Menu Screen. The number which is
entered will be displayed from the last digit, and it is shifted leftward
as a next number is entered.
5 Touch [OK] to complete the setting and return to the Machine Manager
Setting Menu Screen.
To Next Page
Loading...
Need help?
General
