Setup
3
200/250/350 3-35
3.8 Mail/Scan Settings (E-Mail Mode)
You can specify the maximum transmission size, the maximum transmission
quality, and the encoding method that are given priority when sending an In-
ternet fax. The transmission size setting specified here is the default setting
when programming a one-touch dial button.
When sending Internet faxes, the recipient may not be able to view the data
if the receiving machine does not support the transmitted size, quality, or en-
coding method. If the maximum settings have been specified in E-Mail Mode
in advance, the transmission settings are adjusted to the specified maxi-
mum, even if the settings specified for the transmission exceed the maxi-
mum.
In E-Mail Mode, settings can be specified for the following.
TX Size (Max.)
1 In the Network Setting screen, touch [Mail/Scan Settings].
2 Touch [E-Mail Mode].
Item Description
TX Size (Max.) Specify the maximum document size that can be transmitted.
Select “Letter”, “Legal”, or “11 × 17”.
TX Quality (Max.) Specify the maximum resolution that can be sent. Select “200
dpi”, “400 dpi”, or “600 dpi”.
Coding Method Select the encoding method for data to be sent. Select “MH”,
“MR”, or “MMR”. The data capacity is lowest with “MMR” and
highest with “MH”.
Mail/Scan Settings
Enter
E-Mail Mode
Scan Mode
100%
Memory
Free
To Next Page
Loading...
Need help?
General
