1.4 Removing Penalties
1
Di2010/Di2010f/Di2510/Di2510f/Di3010/Di3010f/Di3510/Di3510f 1-7
1.4 Removing Penalties
Unlock
If the “Access Lock” function is set to “ON” and the optional printer controller is in-
stalled, the penalty must be removed in order to allow access after incorrect at-
tempts to access lock jobs and user boxes. For more details, refer to the User
Manual for the printer controller.
In addition, to allow access after incorrect attempts to access Administrator mode,
turn the machine off, then on again.
To Next Page
Loading...
