Konica Minolta DYNAX 5D - Getting Up and Running; Attaching and Removing a Lens

BASICPLMBACK
Images can be viewed in the playback mode. This section covers the basic playback functions. The
playback mode has additional menu functions, see page 82.
ViEWiNGiMAGES
Press the playback button
to activate the playback
mode. To return to the
recording mode, press the
playback button or the
shutter-release button.
The left/right keys of the
controller and the control
dial display the recorded
images.
size (p. 72)
quality (p. 72)
Time of recording-
Date of recording
Frame number / total number of images
ROTATINGiMAGES
Press the down key of the controller to rotate a
displayed image 90 ° left, 90 ° right, or horizontally.
(p. 102)
HISTOGRAMDISPLAY
®
To view the histogram of the
displayed image, press the up key.
Press the down key to return to
single-frame playback.
1. Image size (p. 72)
2. Image quality (p. 72)
3. Shutter speed
4. Aperture
5. Exposure mode (p. 39)
6. Camera sensitivity (ISO) (p. 54)
7. Histogram
8. Focal length
9. Exposure compensation (p. 48)
10. Flash compensation (p. 60)
11. White-balance mode (p. 64)
12. Metering mode (p. 59)
13. Anti-Shake
14. Folder name - file number (p. 120)
15. Date of recording
16. Frame number/
Total number of images
The dark area of the histogram shows the luminance distribution of the recorded image from black
(left) to white (right). Each one of the 256 vertical lines indicates the relative proportion of that light
value in the image. The histogram can be used to evaluate exposure and contrast, but displays no
color information.
L_mina[_celimit display
Areas of the image approaching the shadow and highlight luminance
limit are indicated in the image thumbnail. The portions of the image
which levels are close to 0 and 255 flash.