SETUPMENU
The setup menu controls camera operation. See page 91 on how to open the setup menu.
Use the left/right keys of the controller to highlight the
appropriate menu tab; the menus change as the tabs are
highlighted.
When the required menu section is displayed, use the up/down
key to scroll through the menu options. Highlight the option
whose setting needs to be changed.
Press the right controller key to display the settings; the current setting is indicated by
an arrow. To return to the menu options, press the left key.
Use the up/down key to highlight the new setting. If "Enter" is displayed, press the
central button of the controller to continue.
Press the central button of the controller to select the
highlighted setting.
Once a setting has been selected, the cursor returns to the menu
options and the new setting is displayed. Changes can continue
to be made.
Camera Notes
ghtness (p. 100).
with a computer (p. 100).
-To switch video output between NTSC and PAL (p. 101).
or turn off audio signals (p. 102).
language (p. 102).
(p. 103).
(p. 103).
-To select the folder name format (p. 104).
-To select the destination folder for recorded images (p. 104).
new folder (p. 104).
/To specify monitor backlight illumination period (p. 105).
-To set the auto-power-save period (p. 105).
-To memorize the last menu section opened (p. 106).
the confirmation screen's default setting (p. 106).
Read cleaning instructions before using (p. 106).
functions (p. 108).
To Next Page
Loading...
