Thepapersizeoftheprintcanbespecifiedinsection2ofthe
PictBridgemenu.Theprinter-setupoptionusesthesizesetwith
theprinter.
Highlightthecurrentsizesettinginthemenuand
pressthecentralbuttonofthecontrollertoopenthe
paper-sizescreen.
Usethefour-waykeysofthecontrollertohighlightthe
papersize.
Pressthecentralbuttonofthecontrollertosetthe
papersize.
®
®
®
S Printing Notes
_The following are the dimensions for postcard, L, and 2L paper sizes in both
millimeters and inches for your reference:
Postcar d 100 X 148mm 3.9 X5.9 in.
L 89 X !27rnm 3.5 X5.0 in,
_, 2L 127 X 178mm 5.0 X 7:0 in.
The layout of the print can be set in section 2 of the PictBridge menu. The printer-setup option uses
the layout parameters of the printer. Borderless printing can be specified with the camera as well as
the number of images per page.
The print quality can be set in section 2 of the PictBridge menu. The printer-setup option uses the
quality set with the printer. The fine quality can be specified with the camera.
Data can be printed with the image in section 2 of the PictBridge menu. The printer-setup option
uses the options set with the printer. The date of capture and the file name can be selected for
printing. Data printing can also be disabled with the menu.
DPOF print in section 3 allows still images and an index print selected with the DPOF printing
options in section 2 of the playback menu to be printed from a DPOF compatible PictBridge printer.
Simply select the start option from the menu to begin the routine.
The number of prints in the print run are displayed; an index print
is counted as one. Press the central button of the controller to
begin printing, or press the menu button to return to the PictBridge
menu.
Once printing begins, the operation can be canceled by pressing
the center of the controller. The printing-finished message
indicates the end of the operation; press the center of the
controller and turn the camera off to end the routine.
To Next Page
Loading...
