Konica Minolta MAGICOLOR 2490MF User Manual (English)

Other manuals for Konica Minolta MAGICOLOR 2490MF

User Guide226 pages

Quick Guide8 pages

Reference Guide86 pages

Questions and Answers:

D
Daniel BennettAug 20, 2025
What to do if my Konica Minolta MAGICOLOR 2490MF machine power is not on?
- D
  Deanna Lopez DVMAug 20, 2025
  If your Konica Minolta All in One Printer isn't powering on, check these items: 1. Make sure the power cord is correctly plugged into the outlet. 2. Test the outlet with another electrical appliance to see if it operates properly. 3. Ensure the power switch is in the 'on' (I) position. 4. Verify the machine is connected to a power source that matches the specifications listed in appendix A, “Technical Specifications.”
C
carrie30Aug 23, 2025
What to do if Konica Minolta MAGICOLOR 2490MF resets or turns off frequently?
- T
  Teresa FosterAug 23, 2025
  If your Konica Minolta All in One Printer frequently resets or turns off, first ensure the power cord is correctly plugged into the outlet. Turn off the machine, confirm the cord is secure, and then turn it back on. If the issue persists, a system error may have occurred, and you should contact Technical Support with the error information.
S
stevengillAug 26, 2025
What to do if my Konica Minolta MAGICOLOR 2490MF All in One Printer's media misfeed message stays on?
- R
  Ricky TravisAug 26, 2025
  If the media misfeed message persists on your Konica Minolta All in One Printer, try opening and closing the engine cover again to reset the machine. Also, recheck the media path to ensure all misfed media has been removed.
S
steve32Aug 28, 2025
What to do if my Konica Minolta MAGICOLOR 2490MF misfeeds media in the ADF?
- A
  Anita CantuAug 28, 2025
  If your Konica Minolta All in One Printer is misfeeding media in the ADF, ensure that the loaded document meets the required specifications; for details, refer to “Documents that can be Loaded into the ADF” on page 67. Also, check that the loaded document does not exceed the maximum capacity, as detailed on the same page. Finally, make sure the document guides are slid against the edges of the document; refer to “Loading a Document into the ADF” on page 70 for guidance.
J
Jessica FuentesAug 31, 2025
What to do if my Konica Minolta MAGICOLOR 2490MF All in One Printer's duplex option is misfeeding?
- R
  Rebekah WatsonAug 31, 2025
  If the duplex option on your Konica Minolta All in One Printer is misfeeding, ensure you are using KONICA MINOLTA-approved media. See “Specifications” on page 38 and printer. konicaminolta. com for a complete list of currently approved media. Also, recheck the media path inside the duplex option and make sure that you have removed all of the misfed media.
S
Sharon PerrySep 2, 2025
What to do if several sheets go through my Konica Minolta All in One Printer together?
- R
  Robert SnowSep 2, 2025
  If several sheets are going through your Konica Minolta All in One Printer at once, it could be due to uneven front edges of the media; remove the media, even up the front edges, and then reload it. Alternatively, the media may be moist due to humidity; replace it with new, dry media. Static electricity can also cause this issue; if using transparencies, do not fan them.
S
Steven SmithSep 5, 2025
Why is my Konica Minolta MAGICOLOR 2490MF taking so long to print?
- C
  cquinnSep 5, 2025
  Printing may take longer due to several reasons. The printer might be set to a slow printing mode for special media like thick stock or transparencies; when using regular paper, ensure the media type is correctly set in the driver. The machine could be in power-saving mode, which requires additional time to start printing. Complex jobs naturally take longer to process, so waiting might be necessary. Also, using an incorrect or unapproved toner cartridge can cause delays. Ensure you install a KONICA MINOLTA toner cartridge approved for your specific machine.
D
Danielle WeeksSep 8, 2025
Why does my Konica Minolta MAGICOLOR 2490MF display 'TONER LOW' too early?
- L
  Lauren JohnsonSep 8, 2025
  If your Konica Minolta All in One Printer displays 'TONER LOW' prematurely, one of the toner cartridges may be defective; remove them and check for damage, replacing any damaged cartridges. It could also be due to printing with heavy toner coverage. Check the specifications in Appendix A.
T
Tiffany MartinezSep 12, 2025
Why can't I print the machine status list on my Konica Minolta MAGICOLOR 2490MF?
- E
  esandovalSep 12, 2025
  If you can't print the machine status list on your Konica Minolta All in One Printer, ensure that at least Tray 1 is loaded with media, in place, and secure. Also, check for and clear any media misfeeds.