To Next Page
P
Paul PerezSep 12, 2025
How to fix 'Staple Jam Detection' on Konica Minolta All in One Printer?
- BBrittany MccartySep 12, 2025
To resolve the 'Staple Jam Detection' message on your Konica Minolta All in One Printer: 1. Remove all paper from the finisher. 2. Open the front door. 3. Turn the dial to the left to move the stapler toward the front. 4. Remove the staple cartridge holder. 5. Raise the shutter of the staple cartridge holder, and then remove one sheet of staples. 6. Return the shutter of the staple cartridge holder to its original position. 7. Insert the staple cartridge holder, sliding it along the rails in the compartment. 8. Close the front door.
General
