Korg Beat Boy - Recording and Playback; Recording a Performance

12
Recording a performance
1. Prepare your musical instrument.
Connect a guitar or a bass to the INPUT
jack. Press the DIST/MIC buon to select
the desired distortion type. With acoustic
string instruments or wind instruments,
use the internal mic.
2. Press the RECORDER ON buon to turn
on the recorder.
After the recorder is turned on,
“ ” , track number and
recording time will appear on the display.
If it is the rst time a recording is being
made or if there are no recorded tracks,
“– –” will appear on the track indicator
of the display.
Track number
Recording time
3. Press the REC buon.
The recorder will enter standby mode, and the
recording time indication will blink to show
the amount of time available for recording.
The center indicator of the tuning guide will
blink in red. In addition, the track number
and REC icon will blink on the display,
and the track number will change to “00”.