Korg Beat Boy - Connections

17
Connections
Input - INPUT jack
Connect a cable to your guitar or electric
bass and plug the other end of the cable into
the Beat Boy’s INPUT jack. When tuning or
recording using the internal mic, press the
DIST/MIC buon to select the internal MIC.
The INPUT jack is only for a 1/4" mono
cable. Stereo (TRS) cables cannot be used.
Even if a device is connected to the INPUT
jack, the audio input will be captured by
the internal mic when the MIC is selected.
Output - PHONES jack
You can connect headphones with a 1/8"
mini-plug to the PHONES jack.
When plugged in, no sound will be heard
from the speaker. Use the volume control to
adjust the volume of the headphone output.
Switching distortion type or internal mic
Each time the DIST/MIC buon is pressed,
you can switch the input (distortion type or
internal mic).
Display Input Distortion type
Guitar INPUT jack
Clean
(no distortion)
Guitar OD INPUT jack Overdrive
Guitar DIST INPUT jack Distortion
MIC Internal mic -