Reference
103
COUNTERMODELING
INSERT
EFFECT
EQ
MASTER
EFFECT/
AUX SEND
FINAL
EFFECT
BOUNCECDTUNERRHYTHM
INPUT/
OUTPUT/
SOLO
SYSTEM/
USB
TRACKSONG
IN/LOC1,
…END/LOC4
MARKSCENE
AUTO
PUNCH
TRIGGERSCRUB
METER/
TRACK VIEW
UNDO LOOP
B-U/RstType: “Backup1Song”
Backup the selected song and effect user data.
2. Source ............................................. (001...100)
Indicates the backup-source song number. This shows
the number of the song that is selected in the [SONG]
“SelSong” tab page. (→p.116)
3. Drive ....................................................[S, C, U]
Selects the backup-destination drive. The drive ID, drive
information (type and capacity), and format type will be
displayed.
S: HDD: Hard disk song drive.
(This item cannot be used to backup or restore data.)
C: CD: CD-R/RW drive.
U: USB DOS: USB drive of the hard disk.
3a. Format Type..................... (B, D16[B], Audio)
Indicates the format type of the CD-R/RW disc.
[B] (Backup Type): D1200 or D12 backup CD
D16 [B]: D16 or D1600 backup CD
Audio: Audio CD
4. Destination ..(C, U:CDx01...99, SONG001...100)
Indicates the backup-destination drive and drive infor-
mation (C:CD x required number of discs, or U:SONG–).
When backing up to CD-R or CD-RW, you must use
blank discs.
5. Rename ............................................................
If you set “Drive” to “U:USB-DOS,” you can change the
name of the backup-destination file. (→p.69)
You can input a filename of up to eight characters. Also,
symbols and lowercase letters cannot be used.
6. Exec.(Execute) ...................................................
Executes the backup.
Effect user data will also be backed up at this time.
B-U/RstType: “BackupAllSongs”
Backup the hard disk song drive and the effect user data.
This backup data can be saved only to a CD-R/RW disc.
2. Source .......................................................(ALL)
Indicates that all songs will be backed up.
3. Drive ....................................................[S, C, U]
Selects the backup-destination drive. (→p.103)
Select C:CD in this case.
4. Destination..................................(C:CDx01...99)
Indicates the backup-destination drive and drive infor-
mation (C:CD x required number of discs).
5. Exec.(Execute) ...................................................
Executes the backup. Effect user data will also be backed
up at this time.
5a. Speed ........................... [1x, 2x, 4x, 6x, 8x]
When backing up to CD-R/RW, you can specify the
writing speed. (→p.94)
Only the writing speeds supported by your drive will be
displayed.
Press the [YES/OK] key to begin the backup.
B-U/RstType: “BackupUserData”
Backup the effect user data.
CD-R/RW: All effect user data can be backed up at once.
USB drive: Effect user data can be backed up all at once, or
individually.
2. SourceEffNo....................... (EffAll, Ins001...128,
Mst001...032, Fin033...064)
Indicates the backup-source effect number. If you have
selected the CD-R/RW drive, only “EffAll” can be
selected here.
EffAll: All effect user data
Ins001...128: Insert effect user data
Mst001...032: Master effect user data
Fin033...064: Final effect user data
3. Drive ....................................................[S, C, U]
Selects the backup-destination drive. (→p.103)
4. Destination.......................... (C:CD, U:EffctName)
Indicates the backup-destination drive and drive infor-
mation (C:CD or U: filename).
Normally if you have set the “SourceEffNo”parameter
to “EffAll,” the file name will default to “backup-source
song name .DFX”, and if you have selected an individ-
3
6
2
4 5
3a
1
4
5
2
3
1
45
6
2
3
SYSTEM/
USB
To Next Page
Loading...
