[4] Key Transpose
■ This lets you shift the whole keyboard pitch up or
down in semitone steps, a valuable feature for play
ing music intended for other instruments or for
avoiding difficult keys* You can transpose upward by
up to 5 semitoines and downward by up to 6 semi
tones.
■ Key transpose is set in the play mode, using the enter
key and keys on the keyboard in relation to C. Press
any key up to F above C or F# below C. (Any C will
do.) You transpose up by pressing any key from C #
to F, giving you a range of +1 to + 5 semitones. You
transpose down by pressing any key from B to F#,
giving you a range of - 1 to - 6 semitones. The C key
itself cancels the transpose effect (since it transposes
by 0).
The current value of the transpose parameter is
shown on the display as a tone name from F# to F.
• Example: Transposing up 2 semitones.
When you play a D chord You hear an
E chord
Cancel
transpose
r -
©
F
Transpose
Transpose
down
up
Procedure for using transpose:
Operation
Confirm that the unit is in the play mode.
: 2} Press the enter key.
ENTER
Press ]
Operation of DSS-1
Current transpose value is displayed and you are
prompted to press a key together with the enter key.
(Here the transpose value is C,)
KEV
TRANSPOSE:C
p J1 1 f\ r**™'“4 L11
I 4 » w tala m f ■ * wm • ■ w
■f i.*
ENT
20