¿.About Each of the Functions
rFOSAMPLEIrani
ill About the sample start function
■ Samples the signal from the AU DIO IN jack and stores
that sample in the memory block with the sample
number specified by the F1 SA M P LE NO, /MEM DIV,
function,
9 You can sample repeatedly as many limes as you
like. Each sample will replace the previous one in the
selected memory block. This makes it easy to keep
trying until you get satisfactory results.
■ Input signal level is shown on the peak hold bar graph
meter while sampling, this allows you to adjust the in
put to obtain an appropriate signal level.
■ You can monitor the input signal via the regular audio
outputs* so you can hear what it sounds like.
Example: Using a memory division of 8.
Memory block as specified by sample number
selected by F1 SAMPLE NO /MEM DIV function.
I
*
Ol
02
03
04 n rj 06 07
^ r n m
1
Input signal from audio in jack is
sampled and recorded in this
memory block.
_________________
63
SAMPLE MODE
To Next Page
Loading...
