SAMPLE MODE
2 Sample start function.
Operation
o Confirm that the SAM PLE mode is selected and
that you have completed the IN IT IA L opera
tions {detailed in the previous section starting
on page 61).
Operation of DSS-1
• Indicates SAMPLE mode.
fpAMPl l
On
i Press the number o key in the 10-key pad. This
selects the sample start function.
D
Press
• The DSS-1 stands by for sample start.
indicates sample start lunction.
Confirm the sample number, memory division,
sampling frequency, and original key. Then
press EN TER when you wish to finalize these
settings and go ahead with sampling.
enter
Press
• Display while watting for audio input signal.
Shows that DSS-1 is ready to sample.
f
Indicates trigger level (threshold).
Indicates input signal level.
64
To Next Page
Loading...
