AC CORD SOCKET
Connect the supplied
AC power cord to this
socket.
-■ POWER SWITCH
Turns DSS-1 power on
and off.
MIDI CONNECTORS
IN, OUT, THRO
For connection to other
MIDI equipment.
PROGRAM UP JACK
For connection of a loot
switch to advance the pro
gram (patch) number one
step at a time.
■ About the OUTPUT jacks.
* The audio output stage of the DSS-1 is equipped with
two digital delay lines, DDL-1 going to the LEFT out
put jack and DDL-2 going to the RIGHT jack. Depen
ding on the connection and the kind of output that
you want, the delays can be set for serial or parallel
operation as shown in the charts here.
if you use both jacks then you get parallel delay
which is recommended to provide the maximum
benefits of the dual delays for stereo chorus and
other stereo reproduction effects. However, if you
need monaural output, then you can connect to just
the RIGHT jack. This switches internally to a serial
connection from DDL-1 to DDL-2, combining their ef
fects. (If you use only the left jack, then you get the ef
fect of DDL-1 only.)
PAR ALLEL
— 1-
DDL-1
DDL-2
OUTPUT
L
2 SERIAL
- - - - -
D D H
7fr
OUTPUT
L
R
6
To Next Page
Loading...
