12
Chapter 1
Rear panel
Connectors are located underneath the back of the piano.
1
MIDI (IN, OUT) connectors:
These connectors are used to connect other MIDI
devices (sequencer, keyboards, etc.). OUT: Data output (to be connected to the
MIDI IN connector of another MIDI device). IN: Data input (to be connected to the
MIDI OUT connector of another MIDI device).
See page 35.
2
PC/MIDI selector:
This switch selects whether you can use the MIDI connectors
or the PC (TO HOST) connector.
Warning:
Change the setting of the PC/MIDI switch only when the instrument is
turned off.
3
PC TO HOST connector:
This connector allows the EC350 to be directly con-
nected to a personal computer, provided it is fitted with a serial interface. A dedi-
cated software driver may be needed, and can be freely downloaded from our web
site. Please read the relevant instructions included with the driver.
4
PEDALS connector:
Connect the supplied pedal group to this connector.
See
page 20.
3
4
65
2
1
7
To Next Page
Loading...
