36 Chapter 7
To connect the EC350 to a computer, you need a MIDI interface for the computer,
sequencing or musical notation software, and two standard MIDI cables. Connect
the EC350 MIDI OUT connector to the MIDI IN connector of the computer. Con-
nect the EC350 MIDI IN connector to the MIDI OUT connector of the computer.
For example:
Selecting the MIDI base channel
The MIDI standard has 16 separate channels available for transmission and recep-
tion of data. When turned on, the EC350 receives on all 16 channels, and transmits
on a single channel. To transmit and receive data from the EC350, you need to
choose which of the 16 channels is the MIDI base channel.
Hold down the TRANSPOSE/FUNCTION button, and press the note in the range
C2–D#3 corresponding to the desired MIDI channel.
Key Channel Key Channel
C2 1 C#2 2
D2 3 D#2 4
E2 5 F2 6
F#2 7 G2 8
G#2 9 A2 10
A#2 11 B2 12
C3 13 C#3 14
D3 15 D#3 16
MIDI OUT MIDI IN
MIDI OUTMIDI IN
EC350 connections
panel
MEMMEM
To Next Page
Loading...
