Korg iM1 - Page 32

Available Parameters by Mode
32
OSC BASIC
Refer to M1 owner’s manual PDF, page 22 “OSC BASIC”
OSC MODE ........................................................... [SINGLE, DOUBLE, DRUMS]
Use this parameter to choose the oscillator mode.
ASSIGN.................................................................................. [MONO, POLY]
Use this parameter to choose monophonic or polyphonic
playability.
MONO: Monophonic (one note at a time).
POLY: Play polyphonically (many notes at once).
HOLD ............................................................................. [DISABLE, ENABLE]
Use the HOLD function to determine how the sound will
play.
DISABLE: The sound will decay according to the settings of
the VDA.
ENABLE: The sound will continue even if you release the
keyboard.
OSC1
Refer to M1 owner’s manual PDF, page 22 “F0-2: OSC1”
MULTISOUND 1 ..........................................................................[BROWSER]
Tap the multisound name to access the Browser and make
your selection.
(Refer to "The Browser" on page 14)
OSC LEVEL ....................................................................................[00…99]
This parameter specifies the oscillator's output level.
OCTAVE ........................................................................................[4’, 8’, 16’]
Use this parameter to select the octave setting of the oscilla-
tor.
PITCH EG
The shape of the Pitch EG can be easily modified by simply
dragging the points of the graphical envelope in the display.
(Refer to "Graphical envelopes" on page 11)
VEL SENS
EG INT...........................................................................[–99…+00…+99]
This parameter specifies how velocity will affect the depth of
the EG.
EG TIME ........................................................................[–99…+00…+99]
This parameter specifies how velocity will affect the speed of
the EG.
OSC2
INTERVAL................................................................................ [–12…+12]
This parameter specifies the pitch of Oscillator 2 relative to
Oscillator 1, in semitones.
DETUNE .................................................................................. [–50…+50]
This parameter specifies the pitch of Oscillator 2 relative to
Oscillator 1, in cents.