Korg iM1 - Understanding KORG iM1 Modes of Operation

Introduction
4
iM1 Modes and Structure
The iM1 for iPad loads the Program data independently for
each mode; Programs within each mode can be edited with-
out affecting the other modes.
Combination (Combi) mode
In this mode, the sound consists of eight Timbres; each Tim-
bre is individually assigned to its own Program..
Each Combination contains the following parameters:
• Individual parameters for each Timbre, such as the output
level, pan, and Insert effect on/off settings.
• MIDI-related parameters for each Timbre.
• Master effect parameters.
• Sound-creation parameters for each Program.
Combinations can be selected from the 32 preset cards and
from the new Combinations (the KLC PRESET card). Combi-
nation that you have tweaked, edited, or created from scratch
can be saved to any of the six User cards. Each User card can
hold 50 Combinations, for a total of 300 User Combinations.
In addition, the iM1 provides four user cards that are saved
in the session, and two library cards that are stored within
iM1 itself.
Program
MFX 1
MFX 2
TIMBRE 1
TIMBRE 8
TIMBRE 2
TIMBRE 3
TIMBRE 4
TIMBRE 5
TIMBRE 6
TIMBRE 7
Program
Program
Program
Program
Program
Program
Program
Master FX