Korg iM1 - Combinations; Programs

Writing, Saving, and Loading Data
60
Settings that are remembered when you write a Ses-
sion:
The sound generator parameters of Combi, Multi, and Pro-
gram modes
SETTINGS parameters
User Programs, Combinations, and Drum Kits that are saved
in User cards
Settings that are NOT remembered when you write a
Session:
User Programs, Combinations, and Drum Kits that are stored
in library cards. Programs that are saved in library cards are
automatically stored within iM1 for iPad itself, and can be
shared by all sessions.
Combinations
Combinations you create or edit can be written (stored) into
the iM1 for iPad's internal memory. The iM1 for iPad has six
user cards, each of which holds 50 Combinations. This means
that the M1 can hold a total of 300 Combinations (four user
cards and two library cards).
Settings that are remembered when you Write
• Programs used by each Timbre
• Each Timbre's output settings, MIDI settings, key zone,
velocity zone, and Master effect settings
The Program adjustment parameters in the Perfor-
mance page are applied to the Program parameters
when you Write, and their values will be reset to 00.
Settings that are not remembered when you Write
• Solo/Mute.
• The TABLE settings of the Performance page.
• The VDF Select, VDF EG Select, and VDA EG Select set-
tings of the EASY page.
• The KBD CHASE setting of the OSC page DRUM KIT
• EDIT section and the Point Select setting of the PITCH EG
section.
• The Point Select setting of the VDF page VDF EG section.
• The Point Select setting the VDA page VDA EG section.
Programs
Programs you created or edited in Combination, Multi, or
Program mode can be written (stored) to a user card in the
iM1 for iPad. The iM1 for iPad provides six internal "user
cards," each holding 50 Programs. This gives you a total of
300 Programs stored within the M1.