Korg Kaoss DJ User Manual

4
KAOSS DJ
Operation Guide
3. Preparing the KAOSS DJ to control the Serato DJ Intro
software
Starting the KAOSS DJ
Set the start mode select switch to the controller position, and then connect the KAOSS DJ
to your computer.
Starting Serato DJ Intro
Windows
From the Start menu, click All Programs > Serato > Serato DJ Intro > Serato DJ Intro
Macintosh
Application folder > Serato DJ Intro
Start the application that's in the above folder.
Checking that the KAOSS DJ is recognized
Start Serato DJ Intro which you installed, and check whether the KAOSS DJ is recognized
by your computer.
If it is recognized
Two decks are shown.
If it is not recognized
No decks are shown.

Korg Kaoss DJ Specifications

General

Built-in display	Yes
Sample rate	48 kHz
Product color	Black
Frequency range	20 - 20000 Hz
Number of drum pads	2
USB direct playback	-
Built-in optical drive	No
Number of dedicated effects controls	120
USB connector type	USB Type-B
USB ports quantity	1
Apple docking compatibility	Not supported
Current	5 A
Power supply type	USB
Mac operating systems supported	Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64

Weight and Dimensions

Depth	158 mm
Width	307 mm
Height	42 mm
Weight	730 g