Korg Minilogue XD - Playing the Sequencer

11
Playing the sequencer
Each program in the minilogue xd includes sequence data. In this section, we’ll play the sequence
data saved as part of the preset programs.
1.
Turn the PROGRAM/VALUE knob to
select a program.
The display will indicate the program
name.
2.
Press the PLAY buon in the SE-
QUENCER section.
The sequence data that is recorded in
the current program will begin playing.
The 1–16 buttons will light up to show
the current step while the sequencer is playing.
Tip: The sequencer tempo is set individually in each program. You can change the tempo in
SEQ EDIT mode, “BPM” (p.37). You can also adjust the tempo from 56.0 to 240.0 BPM
(beats per minute) by turning the TEMPO knob.
3.
Press the PLAY buon once more to end the Sequencer playback.
2, 3
1