To Next PageTo Next Page
Need help?Do you have a question about the Korg minilogue and is the answer not in the manual?
General| Product type | Analog synthesizer |
|---|---|
| Product color | Silver |
| User presets quantity | 100 |
| Keyboard number of keys | 37 |
| Maximum polyphony (notes) | 4 |
| Display type | OLED |
| Built-in display | Yes |
| Headphone outputs | 1 |
| DC input voltage | 9 V |
| Power source type | AC |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 500 mm |
| Height | 85 mm |
| Weight | 2800 g |
Lists key features of the minilogue synthesizer.
Illustrates the internal signal flow and components of the synthesizer.
Details the layout and function of the minilogue's front panel controls.
Explains the various input and output jacks on the rear panel.
Provides instructions for powering the minilogue on and off.
Steps to properly power down the minilogue synthesizer.
Explains the automatic power-off function and how to disable it.
Guide to selecting and playing the 200 available programs.
How to recall up to eight favorite programs instantly for quick access.
Steps to register up to eight favorite programs for quick recall.
Instructions for playing the sequence data saved within programs.
Details the components and data included in each minilogue program.
Explains methods for creating new sounds by editing existing programs or from scratch.
Explains OCTAVE, PITCH, WAVE, and SHAPE settings for the oscillators.
Covers CUTOFF and RESONANCE knobs for the low-pass filter.
Explains EG INT knob for controlling filter cutoff over time.
Selects between 2-pole (12dB/oct) and 4-pole (24dB/oct) filter types.
Adjusts how keyboard pitch influences the filter cutoff frequency.
Details ATTACK, DECAY, SUSTAIN, and RELEASE parameters for the VCA.
Explains ATTACK, DECAY, SUSTAIN, and RELEASE parameters for EG modulation.
Covers WAVE, EG MOD, RATE, INT, and TARGET parameters for LFO modulation.
Details HI PASS CUTOFF, TIME, FEEDBACK, and OUTPUT ROUTING for the delay effect.
Explains POLY, DUO, UNISON, MONO, CHORD modes and their depth knob effects.
Details DELAY, ARP, and SIDE CHAIN voice modes and their depth knob effects.
Guide to recording performances and deleting sequencer data.
Detailed instructions for recording notes, rests, and ties step-by-step.
Records knob and switch movements as part of a sequence for playback.
Steps to delete individual recorded motion sequences from memory.
How to edit recorded notes and gate times step-by-step within a sequence.
Steps to access PROGRAM, SEQ, and GLOBAL EDIT modes.
Used for editing program name, slider assignment, and initializing programs.
Used for setting BPM, sequencer timing, and deleting sequence data.
Used for tuning, MIDI settings, and overall synthesizer behavior.
How to create program names and assign parameters to the slider.
Controls BPM, Step Length, Step Resolution, and Swing for the sequencer.
Clears sequence data (notes, motions) or individual motion sequences.
Adjusts overall tuning and transposes the keyboard playing range.
Configures knob operation modes and enables/disables the audio input jack.
Manages SYNC IN/OUT polarity and units, and MIDI capabilities.
Sets MIDI channel, clock source, message transmission/reception, and routing.
Controls parameter display, oscilloscope, brightness, and auto power off.
Performs dumps of all internal data via USB or MIDI.
Performs an auto-tuning function to correct analog drift and maintain pitch.
Resets preset programs and global settings to their original factory defaults.
Provides quick access to loading panel info, tuning, deleting data, and selecting programs/steps.
Explains how to connect external MIDI devices and computers for data exchange.
Connects minilogue MIDI OUT to external MIDI IN for controlling other gear.
Connects external MIDI OUT to minilogue MIDI IN for controlling the synth.
Connects minilogue to computer via MIDI for recording and playback.
Instructions for installing drivers and connecting the minilogue to a computer via USB.
How to set the MIDI channel for communication with external devices.
Disables local control to prevent double triggering when using external sequencers.
Enables/disables transmission and reception of MIDI short messages.
Sets master/slave roles for sequencer synchronization using internal or external clocks.
A comprehensive list of all 200 programs, their categories, voice modes, and slider assignments.
Technical specifications including keyboard, sound engine, I/O, power, dimensions, and weight.
Details MIDI message transmission and reception capabilities for all functions.
