Korg minilogue User Manual

8
Playing Programs and Sequences
Selecting and Playing a Program
The minilogue comes equipped with 200 Programs. Of those, 100 are ready-to-
play preset Programs and 100 locations are available to save your own sounds
and custom edits.
Each Program includes seings for the sound, as well as sequence data and
Voice mode seings.
1.
Enter the Play mode.
When the minilogue is turned on, it will automatically enter the Play mode.
In the Play mode, verify that all of the EDIT MODE and 1–8/9–16 buons
on the front panel are unlit.
TIP
If the EDIT MODE buon or the 1–8/9–
16 buon is lit, press the EXIT buon.
The PLAY or REC buons will light to
indicate when the sequence data saved
in a Program is being played back or is
recording. You can still select other Pro
-
grams in this state, but press the PLAY
buon if you wish to stop the Sequencer.
2.
Turn the PROGRAM/VALUE knob to select a Program.
The display will indicate the Program name and number.
The minilogue comes with 100 preset Programs (001–100) as part of the fac-
tory preload data. These preset Programs are instantly accessible and ready
for you to enjoy. For details, refer to “Program List” (p. 54).
TIP
Hold down the SHIFT buon while turning the PROGRAM/VALUE
knob to skip through the Program List in increments of 10.
TIP
In addition to showing Program name and number, the display can
also be used as an oscilloscope, to show the electrical signals created
by the waveform of the sound. For details on the display, refer to “Os-
cilloscope” (p. 45).
2
1
Make sure they are unlit.

Korg minilogue Specifications

General

Product type	Analog synthesizer
Product color	Silver
User presets quantity	100
Keyboard number of keys	37
Maximum polyphony (notes)	4
Display type	OLED
Built-in display	Yes
Headphone outputs	1
DC input voltage	9 V
Power source type	AC

Weight and Dimensions

Depth	300 mm
Width	500 mm
Height	85 mm
Weight	2800 g