Korg minilogue User Manual

9
3.
Adjusting the OCTAVE range, using the Slider, and changing the Voice
Mode.
As you play, you can use the ve-way OCTAVE Switch to
transpose the playing area of the keyboard by ± 2 octaves.
In addition, you can move the Slider from left to right to add
real-time performance control.
TIP
The parameter assigned to the slider will vary depend-
ing on the Program. Rrefer to “Program List” (p. 54)
to see which parameter is assigned to the slider in each
Program.
TIP
The Slider Assign function in PROGRAM EDIT mode is
used to assign parameters to the slider (“Slider Assign”, p. 33).
In the Play mode, the LEDs below buons
1–8 show the Voice mode status of the cur
-
rent Program. You can use these buons
1–8 to switch between the dierent modes.
For details, refer to “Voice modes” (p. 23).
Using Favorites
Recalling your Favorite Programs
The minilogue includes a Favorites func-
tion, which can be used to instantly recall
any one of the up to eight Programs that
you have previously registered as Favorites
on the minilogue.
1.
In the Play mode, press one of the but-
tons from 1–8 while holding down the
SHIFT buon.
The Favorite Program previously regis-
tered to that buon will be recalled, and
the Program name and number will be
indicated in the display.
12345678
1
1
12345
6
7
8

Korg minilogue Specifications

General

Product type	Analog synthesizer
Product color	Silver
User presets quantity	100
Keyboard number of keys	37
Maximum polyphony (notes)	4
Display type	OLED
Built-in display	Yes
Headphone outputs	1
DC input voltage	9 V
Power source type	AC

Weight and Dimensions

Depth	300 mm
Width	500 mm
Height	85 mm
Weight	2800 g