Korg minilogue User Manual

31
Edit Mode
Although nearly all of the minilogue’s main parameters can be edited using the
knobs and switches on the panel, other detailed parameters are accessed using
the Edit mode.
There are three sub-modes within the Edit mode: PROGRAM EDIT mode,
SEQ EDIT mode, and GLOBAL EDIT mode.
How to enter the Edit mode
1.
Press the EDIT MODE buon.
Each Edit mode is shown in the display,
and the buons light.
2.
Press the EDIT MODE buon repeatedly—
or use the PROGRAM/VALUE knob—to
advance to the PROGRAM EDIT mode,
SEQ EDIT mode, or GLOBAL EDIT mode.
PROGRAM EDIT mode: This mode is used to change the Program name
and assign a parameter to the slider, as well as to initialize Programs and
perform other Program editing functions.
SEQ EDIT mode: This mode is used to set the BPM and congure other
Step Sequencer seings, to delete sequence data, and so on.
GLOBAL EDIT mode: This mode is used to set the tuning and to specify
how the knobs and switches should function, as well as seings that aect
the entire synthesizer—such as MIDI.
3.
Press one of the buons 1–6 (or buons 1–7 in GLOBAL EDIT mode).
The minilogue will enter the selected Edit mode, and the parameter names
will be indicated in the display.
Switch to a dierent page by pressing the same buon in succession.
Buons 1–6 are assigned to specic Edit pages in the PROGRAM EDIT
mode and the SEQ EDIT mode (“PROGRAM EDIT mode”, p. 33) (“SEQ
EDIT mode”, p. 37).
Buons 1–7 are assigned to specic Edit pages in the GLOBAL EDIT mode
(“GLOBAL EDIT mode”, p. 40).
1234567
3
1, 2
2

Korg minilogue Specifications

General

Product type	Analog synthesizer
Product color	Silver
User presets quantity	100
Keyboard number of keys	37
Maximum polyphony (notes)	4
Display type	OLED
Built-in display	Yes
Headphone outputs	1
DC input voltage	9 V
Power source type	AC

Weight and Dimensions

Depth	300 mm
Width	500 mm
Height	85 mm
Weight	2800 g