Korg minilogue User Manual

47
Other functions
Tuning
As with all analog instruments, the minilogue’s circuitry can drift over time
during performance due to changes in environment and temperature. The
minilogue provides an auto-tuning function that automatically tunes the in-
strument’s analog circuits on demand, to correct for any analog drift..
As you continue to play the minilogue for a while right after you’ve turned it
on, the pitch and tone may gradually drift. If the pitch drift becomes notice-
able, use the steps below to tune the instrument. This will manually bring the
minilogue back into tune.
1.
Press the REC buon while holding down the SHIFT buon.
Tuning will begin, and the display will indicate “Tuning...”.
The tuning will take about 15 seconds.
During tuning, you will temporarily be unable to play the minilogue.
Restoring the Factory settings
You can restore the minilogue’s preset Programs and global seings to their
original factory-set state at any time.
1.
Begin with the minilogue turned O.
2.
While holding down the WRITE buon and the EXIT buon, turn the
minilogue On.
“FACTORY RESET” will be indicated in the display.
3.
Turn the PROGRAM/VALUE knob to select the items you wish to reset
to the factory default seings.
PRESET: Restores the preset Programs (Programs 1–100) to their factory-set
default seings.
This will replace the existing preset Programs with the factory-set
default Programs. If you want to keep the existing preset Programs
beforehand, press the WRITE buon to save the presets to the user
Programs (Programs 101–200).

Korg minilogue Specifications

General

Product type	Analog synthesizer
Product color	Silver
User presets quantity	100
Keyboard number of keys	37
Maximum polyphony (notes)	4
Display type	OLED
Built-in display	Yes
Headphone outputs	1
DC input voltage	9 V
Power source type	AC

Weight and Dimensions

Depth	300 mm
Width	500 mm
Height	85 mm
Weight	2800 g