EasyManua.ls Logo

Korg minilogue - Global Settings (Data Dump)

Korg minilogue
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
Button 7 (GLOBAL 7)
These parameters allow you to perform a dump of all the internal data, either
via MIDI or via USB.
All Dump (USB)
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to transmit the MIDI data dump via the USB B connec-
tor. The display will indicate the messageTransmiing”. The data will take
about 10 seconds to transmit.
If the USB cable is not connected, or if the MIDI IN port on the PC is
not open, the data will not be transmied.
All Dump (MIDI)
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to transmit the MIDI data dump via the MIDI OUT
connector. The display will indicate the message “Transmiing”. The data will
take about 30 seconds to transmit.

Other manuals for Korg minilogue

Related product manuals