Korg minilogue - Registering Favorite Programs; Playing the Sequencer

10
Registering your Favorite Programs
You can register up to eight Programs that you particularly like as Favorite
Programs.
1.
In Play mode, turn the PROGRAM/
VALUE knob to select a Program you
like.
The display will indicate the Program
name and number.
2.
Hold down one of the buons from
1–8 while keeping the SHIFT buon
pressed.
The Program will be registered as a Fa-
vorite program, and “Registered to Fa-
vorite” will be indicated in the display.
TIP
The favorite Programs that you
register will be saved in the Global seings.
Playing the Sequencer
Each Program in the minilogue includes sequence data. In this section, we’ll
play the sequence data saved as part of the preset Programs.
1.
Turn the PROGRAM/VALUE knob to select
a Program.
The display will indicate the Program name
and number.
2.
Press the PLAY buon in the SEQUENCER
section.
The sequence data that is recorded in the cur-
rent Program will begin playing.
The 1–8 buons will light up in steps while the sequencer is playing.
TIP
The Sequencer tempo is set for each Program in the SEQ EDIT mode
and saved as part of the Program, but you can adjust the tempo from
56.0 to 240.0 BPM (Beats Per Minute) by turning the TEMPO knob.
3.
Press the PLAY buon once more to end the Sequencer playback.
2
1
12345
6
7
8
2
1
2, 3