EasyManuals Logo

Korg minilogue User Manual

Korg minilogue
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
26
Step Recording
1.
Press the REC buon in the SEQUENCER section while the sequencer is
stopped.
“STEP REC” and “STEP 1” will be indicated in the display.
If the sequence has already been recorded, the note names will be indicated
in the display.
TIP
Select the step you wish to edit. Use buons 1–8
to select steps 1–8
,
and
use buons 1–8 while holding the SHIFT buon to select steps 9–16.
2.
Use the keyboard, REST buon and other controls to edit the notes.
When you record a note, rest, or tie in step mode, the display will automati-
cally move to the next step.
Recording notes
The note name for the keys you press on the keyboard will be indicated in
the display. Check the note name in the display, and if it is correct, release
your nger to record that note and to move to the next step.
If the note name is not correct, just play the correct key while continuing
to hold down the wrong key. Check the note indicated in the display, and
take your nger o the keyboard to move to the next step.
You can also record chords that you play on the keyboard. The number of
notes in a chord will depend on the Voice mode of the current Program
(“Voice modes”, p. 23).
TIP
The note length during recording is determined by the Default Gate
Time value that is set in the SEQ EDIT mode. If you turn the PRO-
GRAM/ VALUE knob while playing the keyboard, the gate time for
only the note(s) you played will be changed when recording.
Recording a rest
You can record a rest by pressing the REST buon.
Recording a tie
Press the REST buon while holding down a key. The note will be tied to
the next note and recorded.
3.
When the set number of steps have nished recording, step recording
will automatically end. Pressing the REC buon at any step during re-
cording will stop the step recording at that step.
TIP
The number of steps is set for each Program, and you can change
the number of steps using the Step Length function in the SEQ EDIT
mode. For details, refer to “Step Length” (p. 37).

Other manuals for Korg minilogue

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Korg minilogue and is the answer not in the manual?

Korg minilogue Specifications

General IconGeneral
Product typeAnalog synthesizer
Product colorSilver
User presets quantity100
Keyboard number of keys37
Maximum polyphony (notes)4
Display typeOLED
Built-in displayYes
Headphone outputs1
DC input voltage9 V
Power source typeAC
Weight and Dimensions IconWeight and Dimensions
Depth300 mm
Width500 mm
Height85 mm
Weight2800 g

Related product manuals