Need help?Do you have a question about the Korg Minilogue XD and is the answer not in the manual?
General| Product color | Black, White |
|---|---|
| Sound effects | Chorus, Delay, Phaser, Reverberation |
| Maximum polyphony (notes) | 4 |
| Input voltage | 9 V |
| Power source type | AC |
| Power consumption (typical) | 8 W |
| Interface | USB |
| DC-in jack | Yes |
| Headphone outputs | 1 |
| MIDI-keyboard number of keys | 37 keys |
| Display type | LED |
| Display digits | 6 digits |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 500 mm |
| Height | 85 mm |
| Weight | 2800 g |
Explains how to select and audition programs using the main controls.
Guides on modifying existing programs by adjusting front panel controls.
Recommends using the panel load function or initializing programs.
Explains how to combine and allocate voices using voice modes and the DEPTH knob.
Details settings for the two VCOs and the Multi Engine, including waveforms and pitch.
Sets output levels for oscillators and the Multi Engine, and adjusts balance.
Configures the Voltage Controlled Filter (VCF), including cutoff, resonance, drive, and keytrack.
Details Envelope Generator (EG) for volume and pitch, and Low Frequency Oscillator (LFO) parameters.
Explains how to select and configure digital delay, reverb, and modulation effects.
Explains step-by-step recording of notes, rests, and ties.
Describes how to record keyboard performances and add overdubs in real time.
Details how to record knob and switch movements as part of a sequence.
Explains the process of accessing PROGRAM, SEQ, and GLOBAL EDIT modes.
Configures joystick assignments (bend range, parameter control) and range.
Sets input mode and parameters for CV IN jacks.
Selects LFO target oscillator and sync options for phase modulation.
Configures VPM oscillator parameters and user oscillator selection.
Details how to reset presets, global settings, or all data to factory defaults.
To Next Page
