Korg Minilogue XD - Deleting Motion Sequences

27
4.
After the set number of steps have nished recording, the Motion Sequence will automati-
cally nish recording as well.
Follow steps 2 and on to record motion sequences for other knobs and switches. The number
of steps is set for each program. You can change the number of steps using the “Step Length”
(p.37) function in the SEQ EDIT mode.
Deleting a motion sequence
You can delete one of the previously recorded motion sequences from “MOTION CLEAR (1...4)”
(p.38) in SEQ EDIT mode.
Tip: To delete all motion sequences at once, use “Motion Clear” (p.38) in SEQ CLEAR, SEQ
EDIT mode.
1.
Press the EDIT MODE buon a number of times to select SEQ EDIT mode.
2.
Press buon 10 to enter MOTION CLEAR.
Tip: While the SHIFT button is pressed, the MOTION VIEW screen will be displayed, where
you can see the graphics for the motion sequences you have recorded.
3.
Press buon 10 a number of times to select the motion sequence to delete.
4.
Turn the PROGRAM/VALUE knob to select “CLEAR...?”, and press the WRITE buon.
The selected motion sequence will be deleted.
5.
Press the EXIT buon.
1 2 3 4 5 6 7 8 1110 129 13 14 15 16
2, 3
5
1
4