Korg minilogue - Page 48

48
GLOBAL: Restores the GLOBAL seings to their factory default seings.
This also includes any favorite Programs that you have registered.
ALL: Restores the preset Programs (Programs 001–100), Programs 101–200,
and GLOBAL seings to their factory-set default seings.
Use caution, as this will replace all data with the factory-set default
seings (which will erase your user Programs).
4.
Press the WRITE buon.
The display will indicate the message “Are you sure?”.
5.
Turn the PROGRAM/VALUE knob to select “Yes”, and press the WRITE
buon.
The factory-set default data will be reloaded, and the minilogue will be re-
stored to its factory default state.
TIP
Press the EXIT buon, or select “No” using the PROGRAM/VALUE
knob and press the WRITE buon to cancel the operation.
Never turn o the minilogue while data is being loaded.