Korg minilogue - Page 32

32
4.
After you have congured the parameters in PROGRAM EDIT mode
and/or SEQ EDIT mode, press the WRITE buon to save your changes.
The display will indicate the message “Where to write?”.
If you do not save your changes and select another Program after you
have congured the parameters in the PROGRAM EDIT mode and
the SEQ EDIT mode, your seings will be lost.
TIP
GLOBAL EDIT mode parameters are automatically saved when you
switch pages, so there is no need to save them manually.
5.
Use the PROGRAM/VALUE knob to select the destination Program num-
ber where you will save your edited sound.
Press the EXIT buon to cancel the save operation and return to Play mode.
6.
Press the WRITE buon to save the seings and return to the Play mode.