Korg minilogue - Program Initialization and Dump

36
Button 5 (INITIALIZE)
This buon initializes the current Program.
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to initialize the Program. The display will indicate the
message “Initialized”.
Button 6 (DUMP)
This buon initiates a Program dump.
Turn the PROGRAM/VALUE knob until “Press WRITE” is indicated in the dis-
play. The WRITE buon will blink.
Press the WRITE buon to send a SysEx Program dump from the minilogue’s
MIDI OUT and USB B connector. The display will indicate the message “Pro-
gram Dump”.