Korg minilogue - Deleting Motion Sequences

28
Deleting a Motion Sequence
If you try to record a fth Motion Sequence, the message “Motion Full” will be
indicated in the display. When this happens, the display will enter MOTION
CLEAR in the SEQ EDIT mode, and you will be able to delete one of the previ-
ously recorded Motion Sequences.
1.
Check that the minilogue is on the MOTION CLEAR function, in the
SEQ EDIT mode.
“MOTION CLEAR” will be indicated in the display. You can delete Motion
Sequences one at a time here.
TIP
Press the EXIT buon to cancel deleting the Motion Sequence.
2.
Press buon 4, and select the motion to delete.
3.
Turn the PROGRAM/VALUE knob to select
the message “CLEAR...?”.
4.
Press the WRITE buon.
The selected Motion Sequence will be deleted.
5.
Press the EXIT buon.
6.
To continue recording a Motion Sequence, press the REC buon, and
press the PLAY buon to stop.
TIP
To delete all Motion Sequences at once, use the “Motion Clear” func-
tion assigned to buon 3 in the SEQ EDIT mode. For details, refer to
“Motion Clear” (p. 38).
3
2
4